MONOCOAT series is designed for the products such as bakeware and cake molds where the life expectancy of the coating is not so important.
- Water-based and solvent-based versions are available.
- It can be also used on electrical appliances like iron sole plates and toaster machines.
- Monocoat provides economical solutions where the requirements are not too high.
- Normally limited colors (dark shades) are available, but there is more color option for bakewares.
|Application||Interior or exterior coating|
|Substrate||Aluminum or die cast aluminum|
|Pretreatment||Sand blasting or grit blasting|
|Aluminum Thickness||2mm or higher|
|Application Method||Automatic or manual spray gun|
|Number of Coats||1|
|Curing Condition||400-410 °C | 10 min. (PMT: 5-7 min.)|
|Dry Film Thickness (DFT)||20-25 µ|
|Color Availability||Some dark colors|
|Max. Operating Temperature||220-240 °C|
Process Flow Chart
DFT: Dry Film Thickness
PMT: Peak Metal Temperature
Actual process flow may differ according to customer line,
please contact ThernaRepresentative for more information.